ALY1S2 Power Off Brake - Handle Release
Voltage: 36 VDC (customized)
Torque: 12Nm minimum
Application: golf carts, AGVs, fitness equipments, medical mobility.. etc.
*Micro-switch attached for signal detection, bending handle release on the top
*Customization Available
Torque: 12Nm minimum
Application: golf carts, AGVs, fitness equipments, medical mobility.. etc.
*Micro-switch attached for signal detection, bending handle release on the top
*Customization Available
ALY1S2 Power Off Brake - Handle Release
Disengaged:
When power is on, the coil will be energized to exert the magnetism and pull the armature plate down to compress springs. Meanwhile, the friction disc in the brake will be disengaged then shaft can move.
Engaged:
When power is off, magnetism in the coil will disappear and the armature plate will be rebounded by springs. At the same time, the friction disc in the brake will be engaged to hold the shaft.
- Manual release: Brake can be disengaged by pulling the handle while power is not supplied.
