ZKA Micro Magnetic Particle Clutch
Voltage: 24 VDC
Torque Selection: 0.5~10 Nm
Application: Tension control
Labeling machines, filming machines, sealing machines, textile machines
Torque Selection: 0.5~10 Nm
Application: Tension control
Labeling machines, filming machines, sealing machines, textile machines
ZKA Micro Magnetic Particle Clutch
Chain Tail's micro particle clutches units utilize magnetic particles to transmit torque. This offers the advantages of more streamlined and softer clutch operation and greater effectiveness during engagement of clutch friction surfaces.
ZKA Examples of installation
-
Installation flange must be firmly attached to the installation board.
-
Drive shaft and load shaft must be connected by a spring coupler, and the alignment and angles must be correct.
-
When installing a belt pan, stay within permitted load ranges.
-
Minimum surface area for an installed heat dissipation panel is 350cm2
- Wide-Range Torque Control
- Continuous Slipping/Operation
- Stable Torque
- No Chirps
- Extra Heat Capacity
- Smooth Engagement and Transmission
- Long Life
- Non-Asbestos Materials