 Operating Guidelines:
 Please prevent the friction surface from grease contamination or it would cause low torque.
 To insure normal operation of armature plate, the air gap must be noticed and kept within +/-20% of specification while adjusting gap. Voltage needs to be input for inspection of armature plate. The air gap needs to be re-adjusted if armature plate can not be released or engaged.
 Please do not knock or drop clutches or brakes while mounting. A deformation of parts may cause failures.
 Please do not bend the plating spring or plating hub which assembled with the plating spring. A deformation may cause failures.
MBG
MCE
MCF
|
